SUPRIM and its logo concept are inpired by diamond crystals and geometry.
A celebration of decades of MSI graphics card mastery, SUPRIM is crafted with qualities that evoke prestige.
High-quality materials and construction are emphasized by the geometry of points, lines, and planes.
The Ultimate Platform for Gamers and Creators
Powered by GeForce RTX 40 Series and DLSS 3
-
New Streaming Multiprocessors
Up to 2x performance and power efficiency
-
Fourth-Gen Tensor Cores
Up to 4x performance with DLSS 3
vs. brute-force rendering
-
Third-Gen RT Cores
Up to 2x ray tracing performance
Cutting-Edge GPUs
NVIDIA Ada Lovelace architecture
Realistic and Immersive Graphics
Dedicated Ray Tracing Cores
AI-Accelerated Performance
NVIDIA DLSS 3
Game-Winning Responsiveness
NVIDIA Reflex low-latency platform
Built for Live Streaming
NVIDIA Encoder
AI-Enhanced Voice and Video
NVIDIA Broadcast app
Fast-Track Your Creativity
NVIDIA Studio
Performance and Reliability
Game Ready and Studio Drivers
CHANGE THE GAME
Ascend to a superior experience with SUPRIM. See, hear, and feel a profoundly elevated graphics card built with high-quality materials and assembled with enthusiast features.
DESIGN
01. SHARP LOOKS
The second iteration of SUPRIM inherits the exterior design philosophy of its predecessor, with a brushed metal cover, octagon-shaped fan cutouts and chevrons around each fan.
BRUSHED METAL
POLYGON SHAPES
02. POLISHED EDGES
Beveled edges are polished several times with a diamond-tipped cutter to achieve a mirror-finish. Clean sharp lines emphasize the metal construction to sight and touch.
03. FINISHING TOUCHES
The motif of straight lines continue around the fans with octagonal cutouts featuring polished 45-degree beveled edges.
TRI-FROZR 3S
THERMAL DESIGN
Upgraded fans, airflow control, and other thermal innovation make TRI-FROZR 3S the best air-cooling solution yet from MSI.
TORX FAN 5.0
TORX FAN 5.0 incorporates design improvements that result in +23% increased airflow compared to an axial fan.
The resulting increased airflow is +10% compared to TORX FAN 4.0 and +23% compared to an axial fan.
Ring arcs link sets of three fan blades that focus airflow into the heatsink. Blades tilt 22 degrees to maintain high-pressure airflow even at slower rotational speeds.
The trailing end of each ring arc folds inward to reduce turbulence and drag.
A fan cowl extends a bit beyond the general enclosure to lengthen the wind’s passageway, allowing airflow to stabilize and move smoother through the fans.
Airflow stability is further improved with both a fan cowl that extends shortly beyond the enclosure to lengthen the air passageway and bulging notches under the cowl to reduce recirculation.
ADVANCED SOLUTION
VAPOR CHAMBER
A Vapor Chamber is excellent for rapidly stabilizing heat on a planar surface. The GPU and VRAM are covered with a Vapor Chamber which transfers heat to Core Pipes.
KEEPING THE CORE COOL
CORE PIPE
Core Pipes are precision-crafted to make maximum use of the available space. A squared section of heat pipes fully touch the vapor chamber to then spread heat along the full length of the heatsink.
AIRFLOW CONTROL
Level up with the Wave-curved 3.0 design featuring updated deflectors. A composition of filled fins, mingled waves, and V-shape fins are each placed in an optimal zone on the graphics card to disrupt unwanted airflow harmonics and reduce noise.
AIRFLOW CONTROL
Sections of different heatsink fins disrupt unwanted airflow harmonics and reduce noise.
FILLED FINS
WAVE-CURVED 3.0
AIR ANTEGRADE FIN
FILLED FINS
Updated heat pipe pathing has allowed more space for additional heatsink fins.
WAVE-CURVED 3.0
Additional efficiency is gained by adjusting the size of the wave edges under the fan motor and other spots where there is less airflow.
AIR ANTEGRADE FIN
Fins with a V-shaped cutout are located at the airflow passthrough to improve flow efficiency. Optimizing the inclination angle and increasing the wave notch shapes the air resistance towards the center, pushing out warm air faster like a nozzle.
METAL BACKPLATE
Thermal pads under the sturdy metal backplate provide additional cooling while the flow-through ventilation reduces trapped heat.
ZERO FROZR
The fans completely stop when temperatures are relatively low, eliminating all noise when active cooling is not needed. The fans will automatically start spinning again when the heat is on during gaming.
DOUBLE-BALL BEARING
Two sets of durable ball bearings spin the TORX FANs for years of intense and lengthy gaming sessions.
PCB and Reinforcement
Anti-Bending – Die Casting
RELENTLESS DEFENSE
A die-cast anti-bending plate reinforces the whole card while thermal pads allow cooling to reach critical component underneath.
* All images and descriptions are for illustrative purposes only.
Visual representation of the products may not be perfectly accurate.
Bracket Stand
YOUR SUPPORT CHARACTER
A bundled support stand can be attached to the PC case to hold up the graphics card.
EXTENSIVELY DEVELOPED.
EASY TO USE!
MSI CENTER
AFTERBURNER
BRINGING IT ALL TOGETHER
MSI's exclusive MSI Center software helps you get the most out of your MSI products. Monitor, tweak, and optimize in real-time with just a few clicks.
Learn MoreMSI AI ENGINE
The MSI AI engine optimizes system settings in real-time by learning user behavior, saving time and effort by eliminating the need for manual adjustments.
Learn MoreMYSTIC LIGHT
Splash on Some Color
Mystic Light gives you complete control of the RGB lighting for both MSI devices and compatible third-party RGB products both inside and outside your system.
Learn MoreRECOMMENDED PACKAGES
After you download MSI Center, you will be presented with a few categories to choose such as gamers, creators, work, etc. Each category contains a set of features recommended MSI for you to install.
Learn MorePRECISION CONTROLS, UNLIMITED POWER
MSI Afterburner is the most recognized and widely used graphics card overclocking software in the world. Take full control of the graphics card while monitoring key system metrics in real-time. It’s free to use and compatible with most other vendor graphics cards.
Learn MoreONE-CLICK OVERCLOCKING
OC Scanner
OC Scanner is an automated function that will find the highest stable overclock settings for your graphics card. Giving you a free performance boost for a smooth in-game experience thanks to higher FPS.
Learn More
GeForce RTX™ 4090 SUPRIM X 24G
NVIDIA® GeForce RTX® 4090 è la GPU GeForce per eccellenza. Offre un enorme balzo in avanti in termini di prestazioni, efficienza e grafica basata sull'intelligenza artificiale. Sperimenta giochi ad altissime prestazioni, mondi virtuali incredibilmente dettagliati con ray-tracing, produttività senza precedenti e nuovi modi di creare. È basato sull'architettura NVIDIA Ada Lovelace e viene fornito con 24 GB di memoria G6X per offrire la migliore esperienza a giocatori e creators.
Boost Clock / Velocità di memoria
- TBD / 21 Gbps
- 24GB GDDR6X
- DisplayPort x 3 (v1.4a)
HDMI™ x 1 (Supporta 4K @120Hz HDR, 8K@60Hz HDR, Frequenza di aggiornamento variabile come specificato in HDMI™ 2.1a)
TRI FROZR 3S Design Termico
- TORX Fan 5.0: Le pale della ventola collegate da archi ad anello e una cappa della ventola lavorano insieme per stabilizzare e mantenere il flusso d'aria ad alta pressione.
- CAMERA DI VAPORE La GPU e i moduli di memoria sono ricoperti da una Camera di vapore che trasferisce rapidamente il calore ai Core Pipes.
- Core Pipe: Precision-machined heat pipes ensure max contact to the GPU baseplate and spread heat along the full length of the heatsink.
- Controllo del flusso d'aria: Sezioni di diverse alette del dissipatore di calore interrompono le armoniche del flusso d'aria indesiderato e riducono il rumore.
Dual BIOS
- Dual BIOS ti dà la possibilità di dare la priorità alle prestazioni complete in modalità GAMING o a basso rumore in modalità SILENZIOSO.
MSI Center
- L'esclusivo software MSI Center ti consente di monitorare, modificare e ottimizzare i prodotti MSI in tempo reale.
Mystic Light
- Controlla l'illuminazione sia per MSI che per prodotti RGB di terze parti compatibili.
